How To Refinish A Vinyl Or Tile Floor Using Floor Finish by Lee Harris

The following procedure is for reapplying coats to an already finished floor or applying finish to a new floor. When finishing a new floor always follow the manufacturers recommendations for prepping the floor. You should always consult the flooring manufacturer on the types of finishes that are suited to your floor. When finishing any floor we recommend that you use a quality floor finish that is correctly matched to your flooring. Our online floor finishing procedures are the general guidelines for finishing a floor. These days floor finish has become the alternative to old fashioned waxes. Floor finish can give a floor a great long lasting shine without the problems of conventional waxes.

Procedure:

Make sure that your floor has been prepared for finishing. Clean the floor removing as much dirt and debris as possible. If the floor has more than 5 coats of finish we recommend stripping the floor first. Too many layers of finish can dull a floor. Over time floor finish can yellow in color, if you see any yellowing on the floor we also recommend that you strip the floor first.

After the floor has been prepared, vacuum or dust mop the floor to remove any dust. We recommend that you spray your dust mop with dust mop treatment to remove as much dust as possible. Make sure to remove anything stuck to the floor, anything that is on the floor when you finish it will become part of the floor finish and you will have to strip your floor and begin again.

Make sure that the floor are you are finishing does not and will not have traffic moving through it for at least 12 – 24 hours depending on the type of finish that your are applying (see floor finish manufacturers specifications for curing and drying time). Use warning signs to make sure the area where you are finishing is marked out so that everyone is aware of the area.

Finishing a floor requires the use of two mop buckets. One bucket will be used to keep the finish mop damp and the other will be used to apply the floor finish. Line the floor finish bucket with a clear trash can liner so that you can dispose of the finish easily after the job is complete.

Fill one mop bucket 1/2 way up with water and the lined mop bucket 1/4 full with floor finish. Dip your finish mop into the water bucket and wring until the mop is damp and water does not drip from the end. Next, dip the damp mop into the floor finish and wring until the finish mop does not drip.

The best way to finish floors is to divide the floor into sections to assure that an even amount of floor finish is applied everywhere. Begin applying the floor finish at the furthest corner from the entrance. Apply floor finish to the baseboard area first (a block applicator can be a great tool for this job) working away from the corner. Make sure the floor finish is going on to the floor in a thin even coat.

After you have applied floor finish to the baseboard move on to the open areas of the floor. Move the mop head in a figure eight motion overlapping mopping sections by about an inch.

After you have applied the finish evenly to the entire area, let the floor dry. The floor should look glossy with no raised areas or drip marks. Follow the floor finish manufacturers recommendations for drying time. Depending on the floor finish you may wish to apply more than one coat of floor finish, if so, let the floor dry in between coats. You may also want to buff the floor in between coats so that the second coat adheres better to the first coat.

To maintain the new look of the floor finish you can burnish with a burnishing floor pad, again see the manufacturers recommendations for maintenance on your floor.

After 12 hours your floor should be fully cured. Floor traffic can now resume.

Great cleaning tips and cleaning information by Lee Harris can be found at http://www.monsterjanitorial.com. Lee Harris is an expert in the cleaning industry and can answer all your questions about Floor Finish. Our information is concise and will give anyone basic information about the right cleaning tool for any job. On our cleaning site we also have a cleaning forum where our users can assist each other with their own questions. A cleaning services directory is readily available for cleaning companies to advertise their site by the state in which they are located.

Article Source: http://www.articlejoe.com

Tags: ,

Helpful Tips On Hardwood Floor Care by LeeAnna –

Just like anything else in today’s times, if you can’t find it on the internet, then it can’t be had. That being said, if you have spent the money to buy a good hardwood floor, then you are going to want to learn good hardwood floor care to protect your investment, and it is an investment since it can bring the resale value up on your house by at least 10% if not more. Hardwood floors are beautiful and depending on what type of hardwood used, how much of an up keep and maintenance on your hardwood floors. Here are some general tips on hardwood floor care.

Solid hardwood flooring, like all solid wood, is a natural insulator. The cleaners used in your hardwood floor care will also help keep the natural insulation in the wood. It’s made of microscopic hollow cells and these air spaces produce high insulating values. It would take 15 inches of concrete to equal the insulating qualities of just one inch of wood. Appearance alone can often determine the grade of each hardwood flooring piece. All grades are equally strong and serviceable in any application. Flooring generally free of eye catching blemishes is known as “Clear”, though it still may contain burls, streaks and pinworm holes. “Select” is almost clear, but this grade contains more of the natural color variations and characteristics such as knots and other marks.

The “Common” grades, No. 1 and No. 2, have more markings than either of the other two grades and are often specified because of these widely varied natural features and the “strong” character they bring to floors. Grades are sometimes combined (i.e., “Select & Better”). Product combinations, such as short pieces or specific grain direction, Quartered and/or Rift, may also be separated by the manufacturer. When you purchase your hardwood floor, be sure to ask them about this specific hardwood floor care, for the type of floor you are getting.

It’s the surface finishes that are very popular since they protect hardwood floors, their durable, water-resistant and require minimum maintenance, a good finish will determine how tough or easy your hardwood floor care will be. Most are made of synthetic resins and are often referred to as urethanes or polyurethanes and give hardwood surfaces a protective coating. These resins come in high-gloss, semi-gloss, and satin finishes. In order to keep your hardwood floors looking beautiful for years, your floor needs to be dust mopped, swept, or vacuumed regularly. Only use a manufacturer’s recommended cleaner and sand, buff, and recoat your floor when the surface no longer shines after cleaning. Depending on the amount of traffic your floor gets will decide how often it will need to be refinished. As long as you use good hardwood floor care techniques your hardwood floors should last a few good years before you need to refinish.

Leeanna is an expert author who writes for Hardwood Floor Care

Article Source: 100% Free Article Directory at ArticleJoe.com